Childs Wagon

Tools needed:

 Table saw or skill saw or gig saw, hammer, screw driver, and drill. 

A. (quanity 2) 3/4 inch x 6 inch x 24 inch (side)

B. (quanity 2) 3/4 inch x 6 inch x 15 inch (front & back)

C. 3/4 inch x 16 1/2 inch x 24 inch (bottom)

D. (quanity 4) 1 1/2 inch x 6 inch circul (wheel)

E. 3/4 inch x 4 inch x 20 inch (handle)

F. (quanity 2) 3/4 inch x 2 inch x 2 inch (handle peace)

G. 1 1/2 inch x 3 1/2 inch x 10 inch (handle mounting plate)

H1. (quanity 2) 3/4 inch x 4 inch x 10 inch (wheel mounting bracket)

H2. (quanity 2) 3/4 inch x 4 inch x 6 inch (wheel mounting bracket)

I. (quanity 4) 1/2 inch x 15 inch (bolt threds both ends,4 nuts, 4 washers)

J. 1/2 inch x 6 1/2 inch (bolt threds both ends,4 nuts, 4 washers)

K. 5/8 inch x 5 inch (bolt with 3 washers and 2 nuts)

Use rubber tape for bottom of wheels.

(quanity 32) 1 1/2 inch wood screws

(quanity 4) 2 1/2 inch wood screws

First useing wood screws put together sides and bottom (refer to diagram for rest).

              Back                                   Home