Pen and Pencil holder

Tools needed:

Table saw or skill saw or gig saw, hammer, screw driver, and drill. 

A. 1/2 inch x 5 inch x 9 inch (center)

B. 1/2 inch x 5 inch x 5 inch (center)

C. (quanity 2) 1/2 inch x 1 1/2 inch x 5 inch (side)

D. 1/2 inch x 6 inch x 6 inch (bottom)

E. (quanity 28) 1 inch wood screws

F. (quanity 2) 1/2 inch x 1 1/2 inch x 6 inch (side)

Refer to drawing for assmbly.

                     Back                       Home