Wagon Yard Planter

Tools needed:

Table saw or skill saw or gig saw, hammer, screw driver, and drill. 

A.(Quanity 2) 1 x 6 inch x 24 inch (sides)

B.(Quanity 2) 1 x 6 inch x 7 inch (front and back)

C. 1 x 2 x 7 inch (front peace)

D. 1/2 x 3 inch wood Dowel

E. 1 x 10 inch circuler

F.(quanity 2) 9 inch x 1/4 inch wood dowel pin for wheels

G. 1 x 7 inch x 25 inch (Bottom)

H. cut out spokes or just paint them black

Dill 1/16 inch hole in bottom at least 5 for drainage.

(quanity 14) 1 1/2 wood screws.

Screw together the fronts and the sides useing 8 wood screws, then screw on the bottom useing 4 wood screws

drill a 1/4 inch hole in sides for wood pin for wheels, at the bottom of the side.Then screw on (c) to the front

of wagon, then drill 1/2 inch hole in the center of (c) for (d), drill 1/4 inch hole in center of (E) for wheel pin.

         Back                          Home