Bird House 5
Tools needed:
Table saw or skill saw or gig saw, hammer, screw driver, drill and creset wrench.
A1-3. 1 by 8 by 8 inch (quanity 3)
B. and C. (quanity 8) 1 by 6 by 6 inch
D. 4 by 4 post with mounting plate.
E. 3 inch eye bolt with nut and washer.
On both front peace's (B) cut out 2 inch hole for bird entry.
On both back peace's (B) cut out a 4 inch by 4 inch door for clean out, Then add 2 inch hinges and cut
finger hole. (see diagram above)
Other parts.(quanity 36) 1 1/2 inch wood screws.
Two 1 inch L brackets with screws for center mounting.
First screw together front and sides, then screw together the bottom to one of the front and sides, then
screw center peace to that, then take other sides useing L brackets and mount other front and side peace's.
Then drill hole for Eye bolt and mount bolt to top to structure. Then sand, paint or stain house.