Outdoor Bench

Tools needed:

Table saw or skill saw or gig saw, hammer, screw driver, drill and creset wrench.

Use one sheet of 4 foot by 8 foot by 3/4 inch plywood

Refer to diagram below

Back 4 foot by 2 1/2 foot.

Bottom 4 foot by 1 1/2 foot.

Sides (see diagram above).

saport peice's (quanity 2) 2 1/2 foot by 4 inches.

Parts (quanity 16) 1 1/2 inch wood screws.

Cut out all peaceses, screw bottom and back to sides and saport peaceses. Then sand and paint.

                            Back                                                Home