Bird House 4

Tools needed:

Table saw or skill saw or gig saw, hammer, screw driver, drill and creset wrench.

A1. Roof top 1 by 12 inchs by 8 inch right side.

A2. Roof top 1 by 11 1/2 inches by 8 inches left side.

B. Front and back (see diagram below).

C. Bottom 1 by 8 inch by 8 inch.

D. Cut 2 inch entry hole in front peace.

E. Post 4 by 4.

F. (quanity 2) 2 inch henges.

G. Mounting bracket with screws.

 Wood screws s1 threw s6, 1 1/2 inches.

Screw together bottom (C) to front and back (B), be sure to leave 2 inch pearch in front of front peace (B),

makeing front and back 6 inches apart. Then screw in left side top, then henges to left side top, then slide

in right side top and screw in henges, this will allow right side to lift for cleaning. Then screw in mounting bracket

on bottom of house. Then mount to pole. Then paint or stain house.

        Back                                             Home